^{3M Filament-Reinforced Electrical Tape 1076 with Oil-Compatible Acrylic Adhesive}

3M Filament-Reinforced Electrical Tape 1076 is a white, 9.5-mil (0.241 mm) thick tape composed of a paper backed glass filament reinforced scrim backing coated on one side with a non-corrosive, oil-compatible acrylic pressure-sensitive adhesive. 

*Commonly used for holding down magnet wire, copper strips (sheets) and insulating materials used in oil filled transformer coil winding applications  *Adhesive requires no heat, moisture or other manner of preparation to affect application 

*Designed for continuous operation not exceeding 105°C (221°F)

3M Electrical Filament Tape 1076 is made of an electrical-grade paper backing, reinforced with scrim glass filaments and an oil-compatible acrylic pressure-sensitive adhesive. Unlike conventional film-backed tapes, this products’ paper backing construction provides for complete impregnation and saturation of the tape in adjacent layers of insulation. This key feature minimizes the possibility of
impregnation voids leading to corona discharges, with subsequent deterioration of insulating materials.
Polyester film used in making traditional designed filament tapes does not absorb transformer oil. The unique coating on the back side of the 1076 tape promotes exceptional bonding of the diamond paper
insulation epoxy during the transformer baking process.

Applications
The primary application for 1076 filament tape is holding down magnet wire, copper strips (sheets) and insulation materials during the demanding coil winding process. Once in place in the transformer coil, the
tape provides a second key performance attribute by saturating in the transformer oil. These attributes together make 1076 filament tape the right choice for oil-filled transformers. A transformer coil is manufactured one of two ways, first by winding magnet wire on a core with layers of secondary insulation
between the layers of magnet wire and secondly by using copper sheets on a core with layers of primary insulation between the layers of copper sheets. A core application for 1076 filament tape is holding down the magnet wire at the beginning and end of each layer. This is also referred to as the start and finish
between magnet wire turns. In addition, 1076 filament tape is used to hold down the insulation sheet layers between magnet wire layers.

Filament tape 1076 is particularly well suited for these applications because of the product’s high tensile strength. This allows the tape to withstand the stress applied to the tape when the windings are being applied at high winding machine speeds.

Filament tape 1076 provides five core performance benefits for critical oil-filled transformer applications.
1. Good initial adhesion of the tape to magnet wire, strip copper and insulation materials
2. Stable adhesion even after long exposure to transformer fluids
3. Stiffness for excellent handling, which promotes operator efficiency during application of the tape during coil winding operations
4. Saturable backing for air entrapment resistance which minimizes the trapped air between adhesive layers in the applied tape

5. Compatibility with diamond paper insulation thermal bonding with back side of tape
6. Easy consistent unwind to promote operator efficiency

抗溶劑、抗剪切能力極佳的膠黏劑 ﹔抗張強度大，使其可以在有絕緣油變壓器中作固定使用

膠帶 1076 主要與其他膠帶不同是

1. 網狀編織纖維補強 較一般直線纖維堅固
2. 特殊設計 減少膠帶包含住的空氣 避免 corona discharge
3. 特殊膠系適用於絕緣油中
4. 從型性好 可貼於不平的表面