^{3M Scotchcast resin joint kits 92-NBA x 灌膠式防水中間接頭 Resin Kit 92-NBA 0 up to 92-NBA 7 Inline Joint Kit Series with Resin 40}

3M  Scotchcast  resin joint kits 92-NBA x are designed to be used for 1-core up to 5-core non shielded, polymeric, low voltage energy cables up to 0.6/1 (1.2) kV. 3M  Scotchcast  resin inline joint kits contain a one-part transparent mould body for simple and easy handling and so distances inside the body can be checked easily. Also included is 3M  Scotchcast  40 Polyurethane resin, delivered in a two-chamber bag with an integrated spout and aluminium guard bag for protection against humidity.

適用電纜外徑 min-max    Cable outside diameter (mm)

* Resin 40 comes in two transparent chamber bags with an integrated Closed Mixing and Pouring (CMP) system.
* One-part mould body with a snap fit closing system for quick and easy handling.
* Transparent mould body for easy control of connector distances in the joint.
* Web spacer for 4-core cable application to ensure the distance between connectors for sizes NBA 1 up to NBA 4.
* Pre-cut foam sealing elements to provide reliable sealing to the mould body without tooling for all cable application diameters.
* Abrasive sponge to clean and roughen the cable jacket.
* Closure cap to prevent any pollution.
 

Type of Test according to EN50393 Table 3 / I / A1        Results
AC Voltage Withstand Test in air 4kV AC/ 1 min           passed
Insulation Resistance Test in air 1kV DC                      > 10.000MΩ
Heat Cycle in air 63 cycles: 5h/3h                               passed
Heat Cycle in water 63 cycles: 5h/3h                           passed
AC Voltage Withstand Test in water 4kV AC/ 1 min      passed
Insulation Resistance Test in water 1kV DC                 > 10.000MΩ

使用方式:

1. 處理準備電纜

2. 對接電纜

3. 兩端裝上密封海綿

4. 放置電纜入外殼內

5. 關閉外殼

6. 混合樹脂

7. 將樹脂袋子旋入外殼開口，噴嘴刺穿袋子

8. 倒入樹脂直至完全滿

9. 關閉外殼開口

1. Preparing the cable

2. Phase connection

3. Positioning of the pre-formed sealing sponges

4. Placement of cables in the housing

5. Closing the housing

6. Mixing the resin

7. Screwing the bag onto the housing, the nozzle will pierce the bag

8. Pouring the resin until it is fully filled

9. Closing the openning

^{3M Scotchcast resin joint kits 91-NBA x 灌膠式防水中間接頭 Resin Kit 91-NBA 0 up to 91-NBA 7 Inline Joint Kit Series with Resin 470  No Longer Available  停產}

3M Scotchcast resin joint kits 91-NBA x are designed to be used for 1-core up to 5-core non shielded polymeric low voltage energy cables. The application incorporates electrical insulation and mechanical protection of joints with compression or mechanical connectors. They can be used for indoor and outdoor, underground and submerged applications.

適用電纜外徑 min-max    Cable outside diameter (mm)

-One part mold construction for quick simple installation
-Top seal & fixing clips for reduced chance of leakage
-Range taking foam seals (no taping or sawing)
-Fully integrated resin delivery for safer, cleaner installation
-Complete with our premium 2 part resin
-Rated up to and including 1.9/3.3kV
-For specialist high humidity applications

Type of Test according to EN50393 Table 3 / I / A1       Results
AC Voltage Withstand Test in air 4kV AC/ 1 min          passed
Insulation Resistance Test in air 1kV DC                     > 10.000MΩ
Heat Cycle in air 63 cycles: 5h/3h                               passed
Heat Cycle in water 63 cycles: 5h/3h                           passed
AC Voltage Withstand Test in water 4kV AC/ 1 min      passed
Insulation Resistance Test in water 1kV DC                  > 10.000MΩ

型號	適用電纜外徑 min-max	內部尺寸長度	外部尺寸長度	兩邊外部圓孔外徑
91-NBA 0	6-16mm	114 mm	148 mm	32 mm
91-NBA 1	10-22mm	144 mm	178 mm	36 mm
91-NBA 2	12-25mm	192 mm	230 mm	38 mm
91-NBA 3	13-32mm	222 mm	270 mm	55 mm
91-NBA 4	18-36mm	270 mm	319 mm	63 mm
91-NBA 5	19-45mm	324 mm	369 mm	76 mm
91-NBA 6	27-54mm	433 mm	479 mm	101 mm
91-NBA 7	29-64mm	556 mm	643 mm	130 mm