^{3M Scotchcast resin joint kits 92-NBA x 灌膠式防水中間接頭 Resin Kit 92-NBA 0 up to 92-NBA 7 Inline Joint Kit Series with Resin 40}

3M  Scotchcast  resin joint kits 92-NBA x are designed to be used for 1-core up to 5-core non shielded, polymeric, low voltage energy cables up to 0.6/1 (1.2) kV. 3M  Scotchcast  resin inline joint kits contain a one-part transparent mould body for simple and easy handling and so distances inside the body can be checked easily. Also included is 3M  Scotchcast  40 Polyurethane resin, delivered in a two-chamber bag with an integrated spout and aluminium guard bag for protection against humidity.

適用電纜外徑 min-max    Cable outside diameter (mm)

* Resin 40 comes in two transparent chamber bags with an integrated Closed Mixing and Pouring (CMP) system.
* One-part mould body with a snap fit closing system for quick and easy handling.
* Transparent mould body for easy control of connector distances in the joint.
* Web spacer for 4-core cable application to ensure the distance between connectors for sizes NBA 1 up to NBA 4.
* Pre-cut foam sealing elements to provide reliable sealing to the mould body without tooling for all cable application diameters.
* Abrasive sponge to clean and roughen the cable jacket.
* Closure cap to prevent any pollution.
 

Type of Test according to EN50393 Table 3 / I / A1        Results
AC Voltage Withstand Test in air 4kV AC/ 1 min           passed
Insulation Resistance Test in air 1kV DC                      > 10.000MΩ
Heat Cycle in air 63 cycles: 5h/3h                               passed
Heat Cycle in water 63 cycles: 5h/3h                           passed
AC Voltage Withstand Test in water 4kV AC/ 1 min      passed
Insulation Resistance Test in water 1kV DC                 > 10.000MΩ

使用方式:

1. 處理準備電纜

2. 對接電纜

3. 兩端裝上密封海綿

4. 放置電纜入外殼內

5. 關閉外殼

6. 混合樹脂

7. 將樹脂袋子旋入外殼開口，噴嘴刺穿袋子

8. 倒入樹脂直至完全滿

9. 關閉外殼開口

1. Preparing the cable

2. Phase connection

3. Positioning of the pre-formed sealing sponges

4. Placement of cables in the housing

5. Closing the housing

6. Mixing the resin

7. Screwing the bag onto the housing, the nozzle will pierce the bag

8. Pouring the resin until it is fully filled

9. Closing the openning

^{3M 電力絕緣防水中間接頭 Scotchcast 91A-Series Inline Jointing Resin Kits   數量有限}

The Scotchcast 91A-Series Inline jointing kits provide you with a complete range of rigid bodied resin cable joints.
The 91A-Series are tailored to join paper and plastic insulated power cables up to and including 3,3kV. They are also used for control and communication cables.
• Advanced Resin Delivery System - totally enclosed mixing and pouring.
• No leaks, no spills, no fumes.
• Safe and easy to use.
• No special tools required.
• Completely cold jointing system.
• Tough reliable joints - tongue and groove mould body
• Scotchcast 1471 polyurethane resin - an extremely reliable jointing resin, it’s very high tear strength results in the strength of the joint being at least equal to that of the cable when being pulled.

APPLICATIONS
• With Scotchcast kits you can join
- power cable, up to 3.3kV
- control cables
- communication cables
• You can use Scotchcast  kits on single or multicore cable.
• Suited to paper, plastic or rubber insulated cables.
• Perfect for cable sheath repair.
• Designed for easy use in surface, direct buried or water
submerged applications.

FEATURES
• Each kit gives you the flexibility to use on a range of cable sizes.
• You will find in each kit all the materials to reinsulate, moisture seal and mechanically protect one joint.
• High quality Scotchcast 1471 polyurethane resin. An unfilled resin with low viscosity gives fast mixing and
pouring, and provides void free filling of the joint.
• The convenient Unipak resin container means perfectly proportioned components for clean easy resin handling.
• A translucent mould body enables you to inspect the joint before and during resin filling to ensure correct joint and
conductor positioning.