^{3M Heatproof Masking Tape 2142 Paper with Acrylic Adhesive 防焊遮蔽紙膠帶丙烯酸膠黏劑 無鉛RoHS}

Tape 2142 : High temperature performance, slivering resistance after heating, no solder bath contamination and easy peel off after masking. Crepe paper with acrylic adhesive. Superior in heat resistance. This tape is developed for wave solder masking of P.C. Board.

Thickness: 0.14 mm / Tensile strength: 43.2 N/cm  / Elongation(% at break): 9 %  / Adhesion: 1.18 N/cm

Application:  Superior in heat resistance /  Easy to apply and remove (no residual) / For temporary paint masking, secure parts, cover circuit board.

3M Scotch High Temperature Masking Tape 2142.

Material: Crepe Paper

Color: Light Yellow

Thickness: 0.14mm

Tensile strength: 43.2 N/cm

Elongation(% at break): 9%

Adhesion: 1.18 N/cm

Adhesive: Single Sided

Long Term Temperature Resistance: 260℃

Short Term Temperature Resistance: 300℃

High temperature performance

slivering resistance after heating

no solder bath contamination and easy peel off after masking

Crepe paper with acrylic adhesive

Superior in heat resistance

This tape is developed for wave solder masking of P.C. Board.

Heat-resistant paper + acrylic Acrylic Adhesive

膠帶2142: 耐熱紙+丙烯酸Acrylic膠黏劑 

好撕不易殘膠

丙烯酸膠黏劑具有優良的耐溫, 抗氧化, 抗溶劑及抗油等功能.

對PCB板或板上重要区域提供高温遮蔽保護

總厚 0.14mm  功能: 防焊 遮蔽 固定 (耐熱 300°C/H)  長50M

提供良好的黏合力與特別耐高溫的特性
提供良好的黏合力可避免膠帶表面突起或捲曲
壓克力膠配方，產品具極佳的初期黏性，服貼性佳，可用於高曲度表面，可輕易的摺彎成曲線，對圓弧型線條也有極佳保護效果
可用於高曲度表面，可輕易的摺彎成曲線，對圓弧型線條也有極佳保護效果
3M  耐高溫皺紋紙遮蔽膠帶 2142 適用於高溫遮蔽條件下

膠帶重新捲繞是平順的，所以每次都能裁切精準的長度。因為採用柔性紙基，因此還黏附在尖銳曲線的外圍。它可以適應從室溫到高溫的極大溫度範圍 。

^{3M Paper Masking Tape 2214 遮蔽紙膠帶}

3M Paper Masking Tape 2214 is a general purpose paper tape for holding, bundling, sealing, and non-critical masking jobs where a pressure sensitive tape is needed.

Backing:Crepe paper

Adhesive:Rubber

Color:Natural

Standard Roll Length: (55 m) 60 yds.

Adhesion to Steel: 22 oz./in. width (24 N/100 mm)
Tensile Strength: 22 lbs./in.width (385 N/100 mm)
Elongation at Break: 9%
Tape Thickness: 5.2 mils (0.13 mm)
Temperature Use Range: Up to 150°F (66°C) for 30 minutes

Crepe paper backing for conformability that will maintain integrity when formed around a corner.
• Easy tear and sliver resistant.
• Rubber adhesive with instant adhesion that sticks easily.
• Good holding power that resists lifting or curling and helps reduce rework.
• Sliver resistance with one piece removal to help reduce labor.
• Special backsize treatment that controls unwind and helps reduce waste.
• Tape may become very difficult to remove if subjected to prolonged outdoor
exposure.

原色 皺紋紙基材  橡膠   皺紋紙基材能耐溶劑滲透

^{3M Paper Masking Tape 2218 遮蔽紙膠帶}

3M Paper Masking Tape 2218 is a general purpose paper tape for holding, bundling, sealing, non-critical masking and a vast number of other jobs where a pressure-sensitive tape is needed.

Backing: Crepe paper

Adhesive: Rubber

Color: Natural

Standard Roll Length: (55 m) 60 yds.

Adhesion to Steel: 32 oz./in. width ( 0.9 Kgf/in.)
Tensile Strength: 20 lbs./in. width
Elongation at Break: 10%
Tape Thickness: 5.8 mils (0.147 mm)
Temperature Use Range: Up to 150°F (66°C) for 30 minutes

• Rubber adhesive with instant adhesion that sticks easily.
• Good holding power that resists lifting or curling and helps reduce rework.

• Crepe paper backing for conformability that will maintain integrity when formed around a corner.

• Easy tear and sliver resistant.
• Sliver resistance with one piece removal to help reduce labor.
• Special backsize treatment that controls unwind and helps reduce waste.
• Tape may become very difficult to remove if subjected to prolonged outdoor
exposure.

與 2600比較  3M 2218   長度增加至 50m       黏度 一樣 32 oz./in.      厚度 一樣 0.147 mm   耐溫  變 66°C

^{3M Tartan Brand 200 Masking Tape  遮蔽紙膠帶 200橡膠膠黏劑 無鉛RoHS}

This tape is A utility purpose paper tape used for holding, bundling, sealing, non-critical masking and a vast number of other jobs where a pressure-sensitive tape is needed.

Backing: Natural colored crepe paper
Adhesive: Rubber
Standard Roll Length: 60 Yards (55 meters)

Adhesive : Rubber adhesive

Total thickness: 0.11 mm

Adhesion to Steel: 32 oz./in. width (35 N/100mm)
Tensile Strength (Break): 20 lbs./in. width (350 N/100mm)
Elongation (Break): 8%
 

Tape No. 200 is typically used at room temperature but will function up to 200°F (93°C) for periods up to 1/2 hour.  Tape No. 200 should not be subjected to outdoor or UV exposure.

原色 皺紋紙基材  橡膠   皺紋紙基材能耐溶劑滲透 總厚 0.11mm  長55M. 有分45米跟55米

^{3M High Performance Masking Tape 232 遮蔽紙膠帶 無鉛RoHS}

Scotch High Performance Masking Tape 232 is designed to be used in medium temperature paint bake operations.

• Has been laboratory tested on painted panels and found to remove cleanly at bake temperatures of up to 250°F (121°C) for 30 minutes. Clean removal can vary dependent on surface type, processing conditions (such as multiple bakes), type of paint involved as well as the temperature of the surface at removal.

• Excellent transfer resistance to “difficult to remove from” surfaces like EDPM
rubber moldings.
• Tests indicate it is better than conventional masking tapes for sunlight resistance, it is still advised that it not be subjected to outdoor exposure or prolonged periods of sunlight as tape may become difficult to remove.

• Excellent paint masking tape.
• Used throughout industry for holding, protecting, bundling and a vast number of other difficult jobs where a pressure sensitive tape is needed.

Backing : Smooth tan crepe paper with a solvent resistant saturant
Adhesive : Rubber adhesive

Adhesion to Steel: 41 oz./in. width (44 N/100 mm)
Tensile Strength: 27 lbs./in. width (472 N/100 mm)
Elongation at Break: 8%
Tape Thickness: 6.3 mils (0.16 mm)
Temperature Use Range: Up to 250°F (121°C) for 30 minutes

Total thickness: 0.14 mm

Standard Roll Length: 55M

Tape 232 is used for paint masking tape, bundling and protecting. It is tough and extremely smooth, natural-colored, 5.7 mil (0,14 mm) thick, high performance, crepe paper tape. Scotch Performance Masking Tape 232 will generally function during bake cycles of up to 200°F(90°C) for up to one hour. It should not be exposed to outdoor exposure.

原色 皺紋紙基材  橡膠   皺紋紙基材能耐溶劑滲透 總厚 0.14mm  功能: 塗裝遮蔽 固定 長55M. W1490mm or 12"

^{3M 244 Paper Masking Tape 遮蔽紙膠帶丙烯酸膠黏劑 無鉛RoHS}

This tape is Washi (Japanese flat paper) uniformly coated with acrylic adhesive. This is just the right tape for paint masking.

Backing : Yellow Washi (Yellow Japanese flat paper)
Adhesive : Pressure sensitive acrylic adhesive

Total thickness: 0.08 mm
Tensile strength (MD): 3.5 Kg/12mm ( 28.6 N/cm)
Elongation: 5 %
Adhesion to SUS(180° Peel): 130 g/12mm  ( 1.06 N/cm)

Masking for a boundary line when painting /  Holding masking paper and cure sheet /For the use of general application ; holding, bundling. It is superior for the use of masking especially when painting a transport and building.

1. This tape will not give adhesive residue and not change color up to 150 for 30 minutes. This tape does not break when peeling off, but can be easily torn by hand.  2. The back side of this tape will not repel the paints.  3. This tape is designed to give an excellent paint break line.

厚度 : 0.08 mm
粘合力 : 270 gf/in

總厚 0.08mm 固定 長50M

丙烯酸Acrylic膠黏劑  丙烯酸膠黏劑具有優良的耐溫, 抗氧化, 抗溶劑及抗油等功能. 不留殘膠. 在 150 度 攝氏, 30 分鐘內不變色. 方便用手撕斷. 模型製作噴漆遮蓋膠帶.

功能: 塗裝遮蔽, 也可於固定和捆扎用途上使用. 日本製

^{3M Flatback Masking Tape 250 遮蔽紙膠帶} 無鉛RoHS

This tape 250 is Flatback masking tape for a wide variety of bundling and holding applications where
a stronger paper backing is needed. It also can be used for straight line paint masking, for splicing and for protecting.

Backing: A flat stock paper
Adhesive: Rubber
Standard Roll Length: 60 yds. (54.8m)

Adhesion to Steel: 65 oz./in. width (71 N/100mm)
Tensile Strength: 62 lbs./in. width (1086 N/100mm)
Elongation at Break: 3%
Tape Thickness: 5.9 mils (0.15mm)
Temperature Use Range: Up to 250ºF (121ºC) for 30minutes

1. The adhesive on this tape is aggressive, and has exceptional holding ability to a wide variety of surfaces.
2. The backing has good solvent resistance for paint masking if a tape of this strength is required.
3. Tape 250 is not recommended for outdoor exposure. Tape may become very difficult to remove.
4. This tape will generally perform satisfactorily on painted metal surfaces at temperatures up to 250ºF (121ºC) for about 30 minutes.
5. Tape 250 can be qualified for PPP-T42C Type II, CID-A-A-883B, MIL-F-18264D.
6. Tape 250 is manufactured in an ISO 9002 registered plant to meet worldwide quality standards.

Good holding power, Good tensile, Solvent and moisture barrier, Thinness, Controlled unwind

厚度 : 0.15 mm  粘合力 : 65 oz./in. width (71 N/100mm)

平面紙  橡膠   長55M,  在 121ºC, 30 分鐘內不變色. 方便用手撕斷.

功能: 塗裝遮蔽, 也可於固定和捆扎用途上使用.

^{3M 2364 Masking Tape 遮蔽紙膠帶}

Scotch Performance Masking Tape 2364 is a tan colored crepe paper masking tape for general masking applications in the industrial market where good holding power and temperature performance is required.

Backing : crepe paper treated with a heat resistant saturant
Adhesive : Natural/synthetic Rubber Blend

Adhesion to Steel: 36 oz./in. width (39 N/100 mm)
Tensile Strength: 30 lbs./in. width (525 N/100 mm)
Elongation at Break: 10%
Tape Thickness: 6.5 mils (0.165 mm)
Temperature Use Range: Up to 300°F (149°C) for 30 minutes

Standard Roll Length: 50M

皺紋紙基材  天然合成橡膠混合

功能: 耐高溫 149°C  通用型遮蓋膠帶,  塗裝遮蔽, 烤漆噴漆油漆遮蔽用, 也可於固定和捆扎用途上使用.

^{3M 2600 Masking Tape 美紋膠帶 遮蔽紙膠帶 台灣製}

#2600 is a general purpose masking tape used for holding, sealing non-critical masking and general utility paper tape applications. for labeling, bundling, wrapping, and mounting. Made in Taiwan

Backing : crepe paper
Adhesive : Rubber

Adhesion to Steel: 32 oz./in.
Tensile Strength: 20 lbs./in.
Elongation at Break: 10%
Tape Thickness: 5.8mils (0.147 mm)
Temperature Use Range: Up to 228°F (95°C) for 30 minutes

Standard Roll Length: 45M

功能: 通用型遮蓋膠帶,  塗裝遮蔽, 烤漆噴漆油漆遮蔽用, 也可於固定和捆扎用途上使用.

^{3M Paper Masking Tape 2688 遮蔽紙膠帶丙烯酸膠黏劑}

This tape is Washi (Japanese flat paper) uniformly coated with acrylic adhesive. This is just the right tape for paint masking.

Backing : Yellow Washi (Yellow Japanese flat paper)
Adhesive : Pressure sensitive acrylic adhesive

Total thickness: 0.08 mm
Tensile strength (MD): 3.5 Kg/12mm (28.6 N/cm)
Elongation: 5 %
Adhesion to SUS(180° Peel): 130 g/12mm (1.06 N/cm)

Masking for a boundary line when painting /  Holding masking paper and cure sheet /For the use of general application ; holding, bundling, and so on

1. This tape will not give adhesive residue and not change color up to 150 degree C for 30 minutes. This tape does not break when peeling off, but can be easily torn by hand.  2. The back side of this tape will not repel the paints.  3. This tape is designed to give an excellent paint break line.

丙烯酸Acrylic膠黏劑  丙烯酸膠黏劑具有優良的耐溫, 抗氧化, 抗溶劑及抗油等功能. 不留殘膠. 在 150 度 攝氏, 30 分鐘內不變色. 方便用手撕斷. 模型製作噴漆遮蓋膠帶.

黃色 總厚 0.08mm  功能: 塗裝遮蔽 固定 . 日本製

2688我們的是小軸心規格品,18mm & 24mm

244是大軸心可裁切

^{3M Flatback  Paper Electrical Tape 16 Coil cover  線圈包覆紙膠帶 無鉛RoHS}

3M Flat-Backed Paper Electrical Tape 12 is used for banding coils and for cover on bobbin-wound coils. Conformable; for use as coil cover and end-turn taping.

Adhesive: Thermosetting Rubber
Operating Temperature: 105°C/221°F
Total Thickness: 9.0 mil/0.228 mm
Dielectric Breakdown: 2500 volts
Insulation Resistance:>1000000 megohms
Breaking Strength: 25 lbs./in (44 N/mm)
Elongation at Break: 10%
Adhesion to Steel: 50 oz/in (5.5 N/mm)

總厚 0.228mm  功能: 塗線圈包覆.

^{3M Flatback Paper Electrical Tape 12 Coil cover  線圈包覆紙膠帶 無鉛RoHS}

3M Tape 12 Flatback Paper Tape With Thermosetting Rubber Pressure-Sensitive Adhesive is used for banding coils and for cover on bobbin-wound coils. Conformable; for use as coil cover and end-turn taping. 3M 12 Electrical Tape is a flatback paper tape with a thermosetting, natural rubber resin, pressure sensitive adhesive. This tape is designed for continuous operation at 105˚C.• Highly conformable • Puncture resistant • Good cushioning properties

Backing: Flatback Paper
Adhesive:  Thermosetting Rubber
Backing Thickness: 3.0 mils/0.076 mm
Total Thickness:  5.5 mils /0.140 mm
Operating Temperature: 105°C (221°F)
Dielectric Breakdown1 2000 Volts
Insulation Resistance:>1000000 megohms
Breaking Strength: 22 lbs. /in (38.5 N/10 mm)
Adhesion to Steel: 40 oz/in (4.4 N/10 mm)

總厚 0..076mm  功能: 塗線圈包覆.