^{3M Scotch Glass Cloth Tape 69 玻璃纖維膠帶 無鉛RoHS}

3M Glass Cloth Electrical Tape 69 is a 7 mil woven glass cloth tape with a silicone pressure-sensitive adhesive sold on a 3 inch core in bulk, and is for electrical OEM customers. UL Recognized 200°C. Printable. Tape 69 is edge-tear resistant conformable, high-temperature flame resistant adhesive; for use as a coil cover, anchor, for banding and core, layer and crossover insulation.

• Insulating electric and induction type furnace power supply leads /• Securing high temperature, non-PSA insulations asbestos and glass) in high temperature areas / • Securing Scotch 77 Fire Retardant Electric Arc Tape / • Replacing 3M 27 Glass Cloth Electrical Tape where a higher-temperature tape is needed / • Reinforcing insulation in electrical installations heavy loads cause high heat and breakdown of insulation (e.g. motor control exciter feeds) / • Splicing silicone-covered glass wire where splices require more abrasion resistance and mechanical strength than can be provided by silicone tapes / • Insulating Class "H" dry-type transformer leads

Thickness: 7.0 mils (.177 mm)
Tensile Strength: 180 lbs./in (314 N/10mm)
Elongation at Break: 5%
Adhesion: 40 oz/in (4.4 N/10mm)
Electrical Strength: 3000V
Insulation Resistance: 4.8 x 104 megohms
Electrolytic Corrosion Factor:  0.9
Functional for Life of Component:  200°C
 

• 3/4"x66' ( 0.18mmx19mmx20m) / 50 pcs per case or  Bulk 24"x60M a roll

3M高溫玻璃纖維膠帶為白色玻璃布膠帶，膠帶的膠採用高溫熱固的矽膠，特別適用於高溫場合，UL認可的連續工作溫度可至200°C，同時，它符合美國軍標MIL-I-19166C. UL510認可的產品適用於不超過200°C的溫度使用，且具有阻燃性。
● 適用範圍 :  感應電爐電源，引出線電氣絕緣  ● 高溫應用場合，固定無粘高溫絕緣體  ● 固定3M77#防火帶或其它防火膠帶  ● 代替需要高溫要求的膠帶  ● 礦井設備的修補和加強絕緣  ● 重負荷，高溫環境應用下，作加強絕緣用  ● 硅橡膠帶外作抗摩擦、磨損等機械保護  ● H級幹式變壓引出線

厚度為7.5mil（0.19mm）
為含熱固性（Thermosetting）矽膠之電氣膠帶
使用於H級溫度條件（180℃/366˚F）下
可用來固定無黏膠的絶緣體(如高溫區的玻璃纖維及額定於150℃，180℃，200℃ SF，SFF的電纜接續處理)
亦可使用來強化因高負載產生高熱而有絶緣破壞之虞的設備的絶緣(如馬達控制激磁饋線，矽橡膠被覆玻璃纖維絶緣電線之接頭，H級乾式變壓器引線及熱處理區中SA型電線接頭 )
是77耐弧膠帶外被包覆極佳的材料
本產品品質符合MIL-I-1916bC之標準，UL認可用於200℃

抗撕裂、沖型性好、高溫阻燃膠黏劑
用於線圈封包、固定、綁紮、並用作線芯外層及線間絕緣
可在表面印字
絕佳耐電壓

	Tape 79	Tape 69
Adhesion to Steel	30 oz/in. (3,3N/10 mm)	40 oz/in (4.4 N/10 mm)
Breaking Strength	150 lbs./in. (262N/10 mm)	180 lbs/in (314 N/10 mm)`
Insulation Resistance	5.0 x 10000000	4.8 x 10000 megohms
UL 510 Flame Retardant	NO	YES
temperature resistance	150 °C	200 °C
adhesive	electrical grade acrylic	silicone