^{Tape 62 Bondable PTFE Film With Silicone Adhesive 聚四氟乙烯薄膜 printable bondable}

3M PTFE Electrical Tape 62 is supplied on a liner; bondable backside for higher adhesion to its own backing and better bonding of resins and varnishes; for use on high temperature coils, capacitators and wire harnesses. Printable. 2.0-mil PTFE backing, supplied on a liner.  Silicone thermosetting adhesive,• Supplied on 3 inch cores. Translucent.

Adhesive: Silicone Thermosetting
Backing: PTFE Film
Backing Thickness: 2.0 Mil
Total Thickness: 4.0 mils/0.102mm
Temperature Class: 180°C /356°F
Dielectric Breakdown: 9500 Volts
Insulation Resistance (megohms): >100000
Breaking Strength: 20 lbs./in. (35 n/10mm)
Elongation (% at break): 200
Electrolytic Corrosion Factor: 1.0
Adhesion to Steel: 30 oz./in. (3.20 n/10mm)

Printable: Yes
UL Flame Retardant: Yes

厚 2mil 薄膜,有襯紙,具有黏結力強的底部膠黏,能更有效地黏合其帶基,並提高對絕緣漆及樹脂的黏結, 用途與 #60 相似﹔可在表面印刷. 膠黏劑 : silicone 微透明