^{3M Scotch Vinyl Electrical Tape 35 for Color Coding PVC Tape 無鉛 RoHS}

Scotch Vinyl Electrical Color Coding Tape 35 is used in phase identification, color coding leads and piping systems and for marking safety areas. This tape is abrasion- and weather-resistant, with excellent mechanical and electrical insulation properties that wraps smoothly and holds tight over a wide range of temperatures. UL Listed and CSA Certified, and is flame-retardant. Excellent all-weather performance in cold to 32°F (0°C) or hot to 220°F (105°C). 7mil thick(0.178mm).

‧ Color: Blue, Brown, Gray, Green, Orange, Red, Violet, White, Yellow.

‧ Size: 1/2 in. x 20 ft. / 13mmx6.1m or  3/4 in. x 66 ft. / 19mmx20.1m

‧ 10 pcs per box & 100 pcs per case (for multi-color pack 5 pcs per box & 60 pcs per case)

35 PVC 絕緣膠帶: 九種顏色，且不易褪色。 優良絕緣性、耐磨、防腐蝕、耐酸、耐鹼性及火燄自熄性 。通過UL, CSA認證 規格: 19mm×20.1m×0.18mm  /  額定溫度: 105℃  主要應用: 線束綁扎

電壓: 600V耐壓值: 1250V/mil延伸性: 225%抗退色能力佳

顏色  紅、黃、藍、棕、灰、白、綠、橙、紫   (白色 抗紫外線)
延伸性 225%
操作溫度 0°C ~ 105°C
22°C 時對鋼板的黏性  20 oz./in.

厚7mil（0.18mm）
溫度範圍從-18 °C至105 °C
一般使用於屋內及非長時間暴露於屋外之相位識別，馬達引線識別，管路系統，安全區域識別，低壓接頭及電纜束之整理
35膠帶顏色有：紅、黃、藍、棕、灰、白、綠、橙和紫色
本產品品質符合UL 510,CSA C22.2等之標準

Commonly used in these types of applications: 

UL510: As primary insulation on applications up to 600V at max temperature of 80°C (176°F) and min temperature of -10°C (14°F) on joints and splices in wires and cables in accordance with NFPA 70, National Electrical Code 

CSA C22.2 No.197: As primary insulation on applications up to 1000V at max temperature of 105°C (221°F) and a min temperature of -10°C (14°F) on joints and splices in wires and cables in accordance with Canadian Electrical Code, Part 1 

IEC 60454-3-1: Classification Type 6, Designation IEC 60454-3-1-6/F-PVCP/90 for thermal index of 90°C (194°F) and min temperature rating of -10°C (14°F) 

Industrial, Commercial and Residential environments 

Where Flame Retardant and Sunlight5 ,Cold Resistance rating is required – UL510 

Marking of safety areas and equipment and identifying cable on cell sites, phase coding, motor leads, and piping systems 

Cable jacket repair (up to 600V (UL) / 1000V (CSA) as Primary Insulation) and as mechanical protection when overwrapping rubber splicing, and mastic tapes used on LV/MV/HV joints and splices 

Critical indoor and outdoor operations as determined by end-user where use of a general use vinyl electrical tape is not recommended 

Available in 10 fade-resistant colors, see table below 

Country of Origin: USA